During the process of stainless steel mirror sculpting, surface polishing is an indispensable part of the details. Below the FRP sculpture manufacturer, what is the specific way to polish the work surface when we make stainless steel sculptures on weekdays?
1, the surface is evenly lapping, the abrasive grain size is 80 - 100.
2. The surface of the wool is polished and the surface has a uniform straight line. Usually, the abrasive belt with a grain size of 180 to 200 is worn on 2A or 2B plate once.
3, the unidirectional surface processing, the reflection is not strong, this surface processing may be the most widely used in building applications. Its technological step is to first polish with coarse abrasives, and finally use the abrasive with a size of 180.
4, to further improve the No.4, with No.4 on the surface of Tampico polishing brush polishing abrasive and oil medium. "None of the surface processing of British standard 1449", but in the United States in the standard can be found.
5, known as the bright polishing, is to have worn very thin but still for polishing of worn surface. Usually use 2A or 2B plate, fiber or cloth polishing buff and corresponding polishing paste.
6, the mirror polished surface has high reflectivity. It is usually referred to as mirror surface processing, because the image reflected is very clear. Continuous polishing is done on stainless steel with fine abrasive and then polished with very fine polishing paste.
It should be noted in the environmental application of stainless steel sculpture that this surface will leave handprints if it is used in a large flow of people or where people often touch them.