欢迎访问玻璃钢雕塑厂家济南万艺雕塑有限公司网站!
全国服务热线
13156155786 (刘经理)13206402200(毕经理)
详情页面

解读不锈钢雕塑制作规范有哪些方面

作者:admin      发布时间:2018-03-15      浏览次数:407

一.材料标准:

1. Material standards:

1.不锈钢选用优质全新的不锈钢板(201彩色不锈钢雕塑、304L亚光或者镜面双曲面锻造比较多的不锈钢雕塑、316L海边不锈钢雕塑)1.5-2.5mm厚(根据不同环境和不同雕塑造型选择材质和厚度).

The 1. stainless steel is made of high quality brand new stainless steel plate (201 color stainless steel sculpture, 304L matte or mirror hyperbolic surface forging, more stainless steel sculpture, 316L seaside stainless steel sculpture) 1.5-2.5mm thick (according to different environment and different sculpture modeling material and thickness).

2.使用原厂生产的、符合国家、行业标准的未使用过的原材料.

2. unused raw materials produced by the original plant and in accordance with the national and industrial standards are used.

二.工艺标准:

Two. Process standard:

1.不锈钢焊接采用亚弧焊熔焊焊法,焊点接口打磨抛光,原子灰找平.

The welding of 1. stainless steel is welded by sub arc welding method, welding point interface grinding and polishing, and atomic ash leveling.

2.基础混凝土标号不低于C30,基础与防雷接地系统同时施工.

2. basic concrete marks are not less than C30, and the foundation and lightning protection grounding system are constructed at the same time.

3.浇制混凝土基础前要把固定螺栓与基础面板两面用螺母拧紧,面板就位安放平正,将固定螺栓与钢筋焊牢.

The fixing bolt and nut based panel by two to 3. pre cast concrete foundation, the panel placed in Euparagonimus, with fixed bolt welded steel.

4.冬季施工时,必须采取有效措施,防止基坑底土的冻胀.

4. during the winter construction, effective measures must be taken to prevent the frost heave of the foundation pit.

三.验收标准:

Three. Acceptance criteria:

1.烧焊不得有影响强度的裂纹、夹渣、焊瘤、烧穿、弧坑和针状气孔,并且无折皱和中断等缺陷.

1. welding shall not affect the strength of crack, slag, overip, burn, craters and needle like pores, and no wrinkle and break the defects.

2.不锈钢板焊接焊点无凹陷、破裂及变色现象,焊点间距小于20mm,焊接处与原钢板保持一致,做到面为面,线为线,角为角,油漆做法同上.

The 2. stainless steel plate welding spot has no sag, rupture and discoloration. The distance between solder joints is less than 20mm. The welding place is consistent with the original steel plate. The surface is surface, the line is the line, the angle is the corner, and the paint practice is the same as above.

3.抗风压雪载设计符合《建筑结构荷载规范》GB50009-2001中的有关规定.

3. the design of anti wind pressure snow load is in accordance with the relevant regulations of the building structure load code GB50009-2001.

4.雕塑的焊接应符合《建筑钢结构焊接规程》GBJ81-91的技术要求.

4. the welding of the sculptures should be in accordance with the technical requirements of the welding regulations of the construction steel structure GBJ81-91.

5.安装做到科学、美观、合理.

The 5. installation is scientific, beautiful and reasonable.

四.质保标准:

Four. The standard of quality assurance:

1.质保期限为本工程交工之日起壹年内.

1. the warranty period is one year within the project completion date.

2.质保期内雕塑自身原因出现的损坏免费维修,超过质保期只收取维修的人工和材料费、终身负责维护服务.

2. the damage of the sculpture itself is free of repair during the period of the warranty period, and the maintenance service is only charged for the maintenance of the artificial and material expenses.


上一篇:制作大型紫砂陶浮雕要细致入微

下一篇:玻璃钢雕塑厂家解读铜雕的修复与保养